ZILLA Billet Intake Manifold for 2010–2015 Camaro SS (LS3 & L99)
Quick answer: The Granatelli Motor Sports ZILLA billet LS intake manifold is a direct fit on the 2010–2015 Chevrolet Camaro SS: the 6.2L LS3 (manual transmission, coupe, convertible and 1LE) and the 6.2L L99 (automatic transmission, coupe and convertible). It comes in three versions: black 105mm (980105), silver 105mm (980105S) and black 120mm (980120). It is machined from solid billet aluminum in Oxnard, California.
Which 5th-gen Camaro SS models does the ZILLA fit?
| Years | Camaro SS model | Transmission | Engine |
|---|---|---|---|
| 2010–2015 | Camaro SS coupe | Manual | 6.2L LS3 |
| 2011–2015 | Camaro SS convertible | Manual | 6.2L LS3 |
| 2013–2015 | Camaro SS 1LE | Manual | 6.2L LS3 |
| 2010–2015 | Camaro SS coupe | Automatic | 6.2L L99 |
| 2011–2015 | Camaro SS convertible | Automatic | 6.2L L99 |
Not listed: the supercharged LSA Camaro ZL1, the LS7 Camaro Z/28 and the 2016-up 6th-gen Camaro SS (LT1). For those, call us before ordering.
Pick your ZILLA
| Part # | Inlet | Finish | Matching throttle body |
|---|---|---|---|
| ZILLA 980105 | 105mm | Black | Granatelli 105mm LS drive-by-wire |
| ZILLA 980105S | 105mm | Silver | Granatelli 105mm LS drive-by-wire |
| ZILLA 980120 | 120mm | Black | Granatelli 120mm LS drive-by-wire |
Still choosing between the inlets? See ZILLA 105mm vs. 120mm vs. MEGAZILLA. Building for boost? See Best Dual-Injector LS3 Intake Manifold for Turbo and Supercharged Builds.
What you get on a Camaro SS
- Machined from solid billet aluminum and made in the USA (Oxnard, California)
- Dual-injection design with 16 injector ports. Plugs are included so you can run 8 injectors.
- Fuel rails included, set up for all 16 injectors
- Takes 38mm LS3/LS7/LSA-style length injectors with LS3/LS7/LSA-style O-rings
- Built for naturally aspirated, turbocharged and supercharged LS combinations
Camaro SS ZILLA FAQ
Does the ZILLA fit both the LS3 and the L99 Camaro SS?
Yes. It is a direct fit on the 2010–2015 Camaro SS with the 6.2L LS3 (manual) or 6.2L L99 (automatic), coupe and convertible, including the 1LE.
Will it fit my 2016 or newer Camaro SS?
No. The 2016-up Camaro SS uses the Gen V LT1, and the ZILLA is an LS manifold. See our Gen V LT billet intake manifold (980106) and call us to confirm fitment.
Do I need a tune?
Yes. A tune is required after installing the ZILLA.
Do I have to run all 16 injectors?
No. Run 8 with the included plugs, or fill all 16 ports when your fuel system needs it.
What should I check before ordering?
Confirm hood clearance, your fuel-system layout and your throttle-body setup. Professional installation is recommended for high-horsepower and forced-induction builds.
Where is it made?
Machined by Granatelli Motor Sports in Oxnard, California, USA. Fitment questions? Call 1-805-486-6644, Monday–Friday, 8am–5pm PST.
