Search By Year,Make and Model
Built to Open, Built to Seal: Inside the Durability of Granatelli Electric Exhaust Cutouts
An exhaust cutout has to open every time and seal every time, under heat, vibration and water. Here is how Granatelli Motor Sports builds its electric exhaust cutouts for durability and a tight close.
An exhaust cutout should deliver excitement every time you open it and a tight seal every time you close it. Underneath a car or truck, heat, vibration, water and thousands of open-and-close cycles test every part of the system. A cutout that looks good on the workbench means little if it sticks, leaks or burns out a motor once it is installed.
For more than 80 years the Granatelli name has stood for innovation, performance and engineering you can trust, from Indianapolis to today's street and strip cars. Granatelli Motor Sports electric exhaust cutouts carry that tradition forward, built for dependable operation, long life and performance you can feel and hear.
Tested for Durability and Leakage
In comparative endurance and leakage testing reported by Granatelli, the Granatelli system came out as the clear durability winner among the cutouts tested. That result speaks to what customers actually need: a valve that keeps working after repeated use and a butterfly that closes off the cutout when you want the exhaust routed through the mufflers.
Sealing matters as much as durability. Plenty of cutouts are judged only on how they look and how loud they get. Granatelli tests how well the assembled system closes, because a cutout that leaks when shut gives you drone and noise you did not ask for.
Durability Starts With the Parts Inside
- CNC-machined 6061 aluminum body for a strong, lightweight housing with accurate sealing surfaces
- Stainless-steel butterfly plate and shaft to stand up to hot exhaust, moisture and road grime
- High-torque DC gear-reduction motor that fully opens and closes the valve
- Heat-resistant carbon steel gears where the motor drives the valve, the connection every cycle depends on
Together these parts give the cutout a solid foundation for the conditions under a vehicle.
One-Touch Control That Protects the Gears
Every Granatelli electric cutout kit comes with the Smart-Chip One-Touch rocker switch. Press it once and the controller runs the valve fully open or fully closed, then stops the motor automatically at the end of travel. That automatic stop keeps the motor from loading the gears once the valve is fully open or closed, which protects the drive mechanism. The switch also remembers the last position.
Want a different way to run it? Add a Granatelli wireless exhaust cutout remote or a billet illuminated push button.
A Cutout for Your Exhaust Layout
No single cutout fits every car, so Granatelli builds the system several ways:
- Sizes: 2.25, 2.5, 3, 3.5 and 4 inches
- Single or dual: one cutout, or one per side on a true dual exhaust
- Slip-fit (clamp-on) or weld-in: slip-fit kits slide over the existing pipe and clamp down with no welding, while weld-in kits suit custom exhaust work
- Mild steel or stainless steel Y-pipes and clamps
Every kit includes the Y-pipe, butterfly valve, three-bolt flange to V-band turndown, a 15-foot extension harness, the One-Touch switch and a rain box. Install the cutout after the catalytic converter, at least 18 to 24 inches downstream.
Not sure which size you need? Use the Granatelli exhaust cutout sizing guide.
Oval Cutouts for Lowered Cars
On a lowered car, the exhaust is often the lowest thing under the body. The Granatelli 3-inch oval exhaust cutout has a low-profile shape that gives installers more room to work in tight underbody space, where a fraction of an inch decides whether the exhaust clears or scrapes.
Value Is More Than the Price Tag
A purchase price tells only part of the story. Judge a cutout by how it is built, how it operates, how it fits and how it holds up over time. Granatelli puts the engineering, the features and serviceable parts into one complete kit, and that is where the value comes from.
The Bottom Line
Open them for the sound. Close them to route the exhaust through the mufflers. Choose them for the engineering behind every cycle.
Granatelli Motor Sports exhaust cutouts carry forward a name built on more than 80 years of innovation, with durability at their core.
Shop Granatelli Exhaust Cutouts
- Granatelli 3" Electric Exhaust Cutout Kit, Stainless Steel Slip-Fit – 302530
- Granatelli Dual 3" Electric Exhaust Cutout Kit, Stainless Steel Slip-Fit – 302530K
- Granatelli Dual 3" Electric Exhaust Cutout Kit, Stainless Steel Weld-In – 307530K
- Granatelli Dual 3" Oval Electric Exhaust Cutout Kit, Stainless Steel Weld-In – 313530D
- All Granatelli Weld-In Electric Exhaust Cutouts
- All Granatelli Exhaust Cutouts
New to cutouts? Start with Exhaust Cutouts: What They Are & How They Work. Questions? See the Exhaust Cutout FAQ and Electronic or Manual Exhaust Cutout?
Related reading: Not all electronic exhaust cutouts are built the same

