Search By Year,Make and Model
Single vs. Dual Injectors on a Granatelli ZILLA LS Intake Manifold
Learn why Granatelli ZILLA LS intake manifolds offer dual-injector capability, when eight injectors are enough and when a staged 16-injector fuel system can make sense.
Short answer: Every Granatelli ZILLA LS intake (980105, 980105S and 980120) is a dual-injection manifold with 16 injector ports, and it comes with injector plugs, so you choose: run 8 injectors with the supplied plugs or run all 16. Most builds are well served by 8. Go to 16 only when fuel demand, E85 and your ECU and injector driver justify a staged system. The included fuel rails are already set up for all 16 injectors.
Once an LS has a big billet intake on it, the next question is almost always fuel. Do you stay with eight injectors, or do you go to a second bank of eight? The answer depends far more on fuel demand and engine management than on the intake itself, and plenty of very fast cars never need the second set.
This article covers the injector side of the decision. If you are still choosing between inlet sizes, start with the LS and LT Intake Manifold FAQ or compare every Granatelli billet LS intake manifold.
ZILLA Injector Layout at a Glance
| Granatelli manifold | Inlet | Injector configuration | Price* |
|---|---|---|---|
| ZILLA 980105 (black) | 105mm | Dual injection, 16 ports; plugs supplied to run 8 | $2,375.00 |
| ZILLA 980105S (silver) | 105mm | Dual injection, 16 ports; plugs supplied to run 8 | $2,375.00 |
| ZILLA 980120 | 120mm | Dual injection, 16 ports; plugs supplied to run 8 | $2,517.50 |
| MEGAZILLA 980103 | Twin 103mm | Not stated on the listing; verify fuel-system configuration before ordering | $3,325.00 |
*Prices as of October 2026. Check the product page for current pricing and stock.
The takeaway: with any ZILLA, the injector decision is yours, not the manifold's. Start with 8 injectors and the supplied plugs, and the second set of ports is already there if the engine outgrows them. The MEGAZILLA 980103 listing does not state an injector configuration, so confirm that with Granatelli Motor Sports at 1-805-486-6644 before planning its fuel system.
Which injectors fit the ZILLA?
Every ZILLA (980105, 980105S and 980120) uses LS3/LS7/LSA-style length fuel injectors with LS3/LS7/LSA-style O-rings. That is true whether you run 8 injectors with the included plugs or fill all 16 ports.
| Injector brand | Sizing / fit | Example flow ratings |
|---|---|---|
| Fuel Injector Clinic | LS3/LS7/LSA-style O-ring versions | Various flow ratings, such as 540cc and 1440cc high-impedance |
| Fuel Injector Development | LSA/LS3/LS7/L76 body and O-ring sizing | 850cc to 2,200cc |
| Injector Dynamics, DeatschWerks, Bosch, Chevrolet Performance | LS3/LS7-style injectors | Choose to suit your horsepower target and fuel type |
These are examples of injectors that fit, not a complete list. Size the injectors to your horsepower target and fuel type. The ZILLA also comes with fuel rails, and the included rails are already set up for all 16 injectors.
Why Eight Injectors Are Enough for Many Builds
A properly sized set of eight modern injectors can support substantial horsepower. For many naturally aspirated and moderate forced-induction combinations, one injector per cylinder keeps the fuel system simpler: one set of injector data in the calibration, fewer fittings and fewer places to leak.
Simple also means easier to diagnose. When something goes wrong on an eight-injector car, the tuner is chasing one fueling strategy instead of two.
Why Builders Add a Second Injector per Cylinder
As total fuel demand climbs, the primary injectors have to get bigger. Extremely large injectors can become harder to control at very low pulse widths, which shows up at idle and light cruise. A staged system solves that by using one set of injectors for normal operation and bringing the second set online as load and fuel demand increase.
A second injector location can also give tuners more flexibility with fuel type, distribution strategy and future horsepower growth. That is why staged injection shows up on high-boost and alcohol-fueled combinations.
Single vs. Staged Dual Injection: Decision Table
| Factor | 8 injectors (one per cylinder) | 16 injectors (staged) |
|---|---|---|
| Manifold | Any ZILLA, with the supplied plugs in the second set of ports | Any ZILLA, all 16 ports in use |
| Engine management | Standard sequential port injection | ECU or controller that can run and stage a second injector bank |
| Fuel rails and plumbing | Included rails | Included rails already fit all 16; plan regulation and line capacity for the added flow |
| Calibration | One injector data set | Staging point and transition must be tuned |
| Best fit | Most NA and moderate boost builds | High fuel demand, alcohol fuels, very large power goals |
What a Dual-Injector Setup Requires
- An ECU or controller capable of managing staged injection
- Regulators and line capacity for the added flow (the included ZILLA fuel rails are already set up for all 16 injectors)
- Injectors matched to fuel pressure and fuel type
- A calibration strategy for when the secondary injectors begin operating
- Enough pump capacity for the total fuel demand of both banks
Miss any one of these and the second bank becomes a liability instead of insurance.
Do Not Size Injectors by Horsepower Alone
Fuel type, base pressure, boost pressure, brake-specific fuel consumption and injector duty cycle all affect required injector flow. E85, for example, typically requires more fuel volume than gasoline for the same power level, so a combination that is comfortable on eight injectors with gasoline can run out of injector on E85. Have the tuner or engine builder size the whole fuel system as one package.
Common Mistakes
- Buying fuel rails you do not need. The ZILLA comes with fuel rails. Dry-fit the rails and injectors before plumbing fuel lines.
- Capping ports with whatever fits. On an 8-injector ZILLA, use the injector plugs supplied with the manifold and follow the installation instructions. Never leave an opening exposed.
- Upgrading injectors without the pump. More injector does nothing if the pump and lines cannot deliver the volume under boost.
- Blaming the ignition for a lean miss. A fuel delivery problem under load can look a lot like spark blowout. Our article on diagnosing a high-RPM misfire walks through how to tell them apart.
Plan the Intake and Fuel System Together
A high-flow intake manifold increases the amount of air the engine is capable of using, and the fuel system has to support that airflow under the same conditions. Pick the manifold, throttle body, injectors, pump and tune as one plan. The Throttle Body FAQ covers matching the 105mm GMTBLS105 and 120mm GMTBLS120 to the ZILLA inlets.
Start with eight injectors when they meet the engine's needs. Move to a staged dual-injector strategy only when the horsepower goal, fuel type and tuning plan justify the added complexity. On a ZILLA, the ports are already there and the included rails are already set up for all 16 injectors, so the upgrade is about injectors, pump and engine management, not the manifold or rails.
Frequently Asked Questions
Do Granatelli ZILLA intake manifolds support dual injectors?
Yes. The ZILLA 980105, 980105S and 980120 are dual-injection manifolds with 16 injector ports. They come with injector plugs, so you can run 8 injectors or all 16.
What injectors fit a Granatelli ZILLA intake manifold?
Granatelli ZILLA intake manifolds (980105, 980105S and 980120) use LS3/LS7/LSA-style length fuel injectors with LS3/LS7/LSA-style O-rings, whether you run 8 injectors with the included plugs or all 16. Injectors that fit include Fuel Injector Clinic LS3/LS7/LSA-style injectors (available in flow ratings such as 540cc and 1440cc high-impedance), Fuel Injector Development injectors from 850cc to 2,200cc in the LSA/LS3/LS7/L76 body and O-ring size, and LS3/LS7-style injectors from Injector Dynamics, DeatschWerks, Bosch and Chevrolet Performance. Size the injectors to your horsepower target and fuel type.
How many injectors does an LS with a ZILLA intake need?
Most builds run eight, one per cylinder. Sixteen injectors in a staged setup are for combinations whose fuel demand, fuel type or power goal is beyond what a properly sized set of eight can handle cleanly.
Does a dual-injector intake need a special ECU?
Yes. A dual-injector arrangement needs an ECU or injector controller that can run and stage the second bank, plus matching regulation and pump capacity. On a ZILLA, the included fuel rails are already set up for all 16 injectors. Talk to a qualified tuner before ordering components.
Do I need bigger injectors for E85?
Usually. E85 typically requires more fuel volume than gasoline for the same power level, so injector size, pump capacity and duty cycle all need to be checked for the fuel you will run.
Will my existing fuel rails fit a ZILLA intake manifold?
You may not need them. The ZILLA comes with fuel rails. If you plan to use other rails, do not assume they fit: injector spacing, mounting height and injector angle vary between manifolds, so dry-fit the rails and injectors before plumbing fuel lines.
Shop the parts in this article
- Granatelli ZILLA Black Billet LS Intake Manifold – 105mm Inlet – 980105
- Granatelli ZILLA Black Billet LS Intake Manifold – 120mm Inlet – 980120
- Granatelli GM LS / LSX 105mm Black Billet Drive-By-Wire Throttle Body – GMTBLS105B
- Granatelli Motor Sports 120mm LS Throttle Body
- Shop all Granatelli billet LS & LT intake manifolds

